I have just purchased a new DG-200 (manufacture date: JAN-2013) and have the following problem:
“The device randomly records an incorrect latitude data point while recording a track.”
It appears that it is adding 100-deg to the latitude value.
Device details are as follows:
Data logging format: Position, Time, Date, Speed
Data logging settings: Enabled WAAS
Data logging interval mode: By Time: 10 seconds
LED: Green flashing at all times.
BATTERY: Fully charged
POWER OFF/ON: Cycled several times during the tracking
Software: Prolific USB-Serial driver version 126.96.36.199
DG-200 Tool: Version S-OPC-15-1211081
Firmware version: F-GPS-0H-1111181
Any suggestions please?
Thanks - Simon.