Hi all, my first post so please excuse any stupid questions!
I have a small boat and I need to input GPS data to my Standard Horizon VHF radio so it can give me a position fix, when required, and also GPS data into an AIS receiver (NASA AIS Radar) which is a bit of kit that tracks commercial vessels and warns of collisions.
Both the VHF (2 wires - GPS output and GPS input) and the AIS (1 wire - GPS input) have bare wire connections.
I was hoping that the BU-355 would be a suitable device. I have seen the pinout and I can supply 5V but I am unsure about the other connections?
Can anyone confirm that the BU-355 will do the job before I buy one? The VHF and AIS Gps input needs to be MNEA 0183 RMC and the AIS specifies that the GPS input should float around 2V - whatever that means!
Hope I am making sense...
Any comments or advice is welcome..