Thank you for sharing this software. We appreciate all your time and effort.
By the way, we encountered some issues when using this program:
Whenever the 'Clear DG-200 Memory' button is pressed, we usually get the following statements:
Clearing DG-200 memory
It may take long if the memory is full
ERROR while clearing DG-200's memory
What do you think could be the problem? After saving the tracks into the GPX format, do we need to perform another step before deleting data from the DG-200?
Another one is the COM Port detection part. The software will always look for the lowest com port rather than the com port of the device is using. For example, the COM18 is designated for the DG-200 and we have another device assigned to COM17. Oftentimes, the DG-200 Toolbox detect COM17 instead of COM18.
When configuring the device, I would like to suggest to reboot the software. So, users can view the modified setting(s) they have loaded into the DG-200. This is not required, but optional in order for them to confirm the changes have been made into the unit.